I
Sculpted LED ceilings
A dropped form cut to a shape drawn for your room, with the light source hidden inside it. What you see is the glow and the shape — never the strip, never a hot spot.
Interior lighting · Chicago
Lighting built into the room — not stuck on afterwards
Sculpted ceilings, slat walls and fireplace surrounds, made to fit one specific room. We design it, build it and wire it ourselves.
We speak Polish · Mówimy po polsku
What we install
II
Slat & geometric accent walls
Full-height panelling in a geometry set out for the specific wall, finished in deep matte with brass or steel inlays. It changes the room more than any paint colour will.
III
Fireplace surrounds
Fluted surrounds and mantels made to the millimetre for the firebox you already have — including the curved returns that stock surrounds never fit.
IV
Whole-home fit-outs
Ceilings, walls, media walls and bathrooms treated as one scheme, on one colour system, controlled from one remote.
Case study
One apartment,
every room
Ceilings, walls, media wall, kitchen and both bathrooms — designed as a single scheme and installed by the same crew. Everything runs on one colour system, so the whole flat changes mood together.
Two jobs, in detail
Geometric slat wall, deep navy with metal inlays
A wall that sets the room
A bedroom with nothing wrong with it and nothing to look at — the kind of blank rectangle that paint alone never fixes, because the problem is not colour but depth.
Full-height battens set out in a geometry drawn for this specific wall, painted a single deep navy so the pattern reads as shadow rather than stripes. Brass and steel inlays were then run along selected lines, which is what stops it looking like panelling and starts it looking deliberate.
Fluted fireplace surround, made to measure
A surround that fits the firebox you own
Stock fireplace surrounds assume a standard opening and a flat wall. Real rooms have neither — this one needed curved returns and a chimney breast that carried on up past the mantel.
The surround was modelled to the actual opening and machined in fluted sections, including the curved returns that no off-the-shelf unit provides. It was assembled and finished on site as one continuous form rather than a kit bolted around the fire.
Rooms we have finished
Photographed as handed over — no renders, no staging beyond turning the lights on.
Showing 65 photographs.
How a room
gets done
Panels arrive finished. The disruptive part of the job happens in our workshop, not in your living room.
- 01
We come and measure
Ceiling heights, joist runs, where the power already is. Most of what is possible in a room is decided by what is above the plasterboard.
- 02
You see it drawn
The ceiling form or wall geometry comes back as a drawing set out for your actual room, with a fixed price. Nothing is ordered until you are happy with it.
- 03
We build it
Panels are machined in our shop, not cut on your floor. That means a few days on site instead of a few weeks, and far less dust.
- 04
We set the light
Colour, brightness and scenes tuned with you in the room, at night, when it actually matters. Then we hand over the remote and show you how it works.
Where we work
We keep to Chicago and the near-west suburbs, because installing our own work is part of how it turns out right. If you are a little further out, ask.
- Chicago
- River Grove
- Elmwood Park
- Norridge
- Harwood Heights
- Park Ridge
- Franklin Park
- Melrose Park
- Des Plaines
- Niles
Not listed? Call [[TELEFON]] and we will tell you honestly whether it is worth the trip.
Questions
worth asking
If yours is not here, phone — you will get a straight answer, including when the answer is that your room will not take it.
- How much does an LED ceiling cost?
- It scales with the size of the room and how complex the form is — a single cove around a bedroom is a different job to a sculpted ceiling with an inset fan. We measure, draw it for your room, and give a fixed price before any material is ordered.
- How much mess does this make?
- Less than people expect, because the panels are machined in our workshop and arrive finished. What happens in your home is fitting, wiring and making good — not cutting. Floors and furniture are covered before we start.
- How long will you be in my house?
- Days rather than weeks for a single room, because the fabrication happens off-site. You will get a realistic schedule when we quote — ask for it, and hold us to it.
- Does it work with my existing ceiling height?
- That is the first thing we check. A dropped form costs you some height, so in a low room we will suggest a shallower profile or a wall-based scheme instead. If a room genuinely cannot take it, we will tell you rather than sell you a compromise you will regret.
- Can the colours change, or is it fixed?
- Either. RGB lets the whole flat shift mood from one remote — warm white for the evening, cold white for cleaning, colour when you want it. Fixed warm white is also an option and some clients prefer it.
- Is the lighting energy-hungry?
- LED cove lighting draws very little compared to the ceiling spots people usually leave on all evening. In practice many clients end up using the main lights less.
- What happens if an LED fails in a few years?
- The runs are built to be serviceable — that is a design decision made at the start, and it is the reason we make our own housings rather than pushing strip into a channel. Ask about the warranty terms when you quote.
- Can you do just one wall, or does it have to be the whole home?
- One wall is fine and it is how a lot of projects start. A single accent wall changes a room more than repainting it.
- Do you work with my designer or architect?
- Yes. If you already have drawings we will build to them; if you do not, we will set out the geometry ourselves and show it to you before cutting.
- Do you speak Polish?
- Yes. Mówimy po polsku.
Tell us about
the room
A photo and rough dimensions are enough to start. We will tell you honestly what will work in that space and what will not.
Call[[TELEFON]]Email[[EMAIL]]
Chicago, River Grove, Elmwood Park, Norridge, Park Ridge and the surrounding suburbs. We speak Polish · Mówimy po polsku